MOTOR SOLUTIONS
We recommend the optimal motor solution based on your load conditions and control method.
PRODUCT PORTFOLIO
Hybrid stepper motors move in fixed increments per input pulse, enabling accurate positioning without feedback devices. Standard, geared, linear-actuator and brake types cover a wide range of factory automation, semiconductor equipment and medical device requirements.
Closed-loop stepper systems combine a stepper motor with a built-in encoder and a dedicated drive that monitors position in real time. They eliminate step-out concerns while keeping cost below comparable servo systems, making them a strong choice for axes that need both reliability and value.
BLDC motors replace brushes with electronic commutation, delivering high efficiency, long service life and low electrical noise. Combined with matched drivers, they serve pumps, fans, conveyors and battery-powered equipment where continuous duty and energy efficiency matter.
Servo systems pair permanent-magnet synchronous servo motors with closed-loop drives to deliver fast acceleration, precise positioning and smooth torque across the speed range. They are the standard choice for high-performance automation axes, robotics and semiconductor equipment.
PM synchronous motors use permanent-magnet rotors to achieve higher efficiency and power density than induction motors, especially in variable-speed pump, fan and compressor duty. GSOLUTECH coordinates custom winding, frame and magnet specification review together with drive pairing.
Motion performance depends as much on the drive and controller as on the motor. GSOLUTECH supplies stepper, BLDC and servo drives plus multi-axis controllers, matched to the motor and verified as a set, so customers receive a working motion axis rather than separate components.
SELECTION GUIDE
Motor capacity is selected from rated/peak torque and load inertia.
We propose motor-drive combinations that match your speed range and command method (pulse/analog/network).
Open-loop, closed-loop or servo control is recommended based on positioning accuracy and step-out tolerance.
Flange standard, mounting space and cable direction are checked against your drawing.
Send your drawing or technical specification to our sales email. We will review and respond after engineering evaluation.